MR2 Turbo Timer Pod

For LHD MR2 (left hand drive)

CNC Machined

Takes the place of the stock MK2 clock.  After removing the stock clock, the tray is installed from the back side of the dash, then the bezel is snapped into place from the front side. This will allow for one boost controller, turbo timer, or other similarly sized device to be installed. Please note that there are many different sizes of controllers, make sure that your controller is close in size to the measurements listed below. (and other similarly shape/size units).

Size of the opening is:
2cm x 7.9cm
.787in x 3.11in