K-Sport Adjustable Endlinks
1989-1999 Toyota MR2 (turbo and non-turbo models)
Sold in pairs (front or rear)
Please specify if you need front or rear and what suspension type you have at the bottom of this screen
These adjustable endlinks replace the non-adjustable factory endlinks for many vehicles, allowing you to lower the vehicle and change swaybar preload. These replace the weak stock endlinks to further reduce the chance for flex under hard cornering.
High quality, high strength design. Long lasting pillowball joints, with integrated dust boots for long lasting and worry-free operation
IMPORTANT NOTE: Other sellers offer standard K-Sport endlinks specified for the MR2 that are only for cars with coilovers and only for the front. The problem with that is the endlinks are too short unless you're using the coilovers and they will NOT FIT a standard strut/spring setup and they also don't list any that fit the rear. We have all lengths avaialble to fit any applicaiton you have. For both front and rear and for both stock strut-type suspension and coilovers as well. Make sure to specify whether you're on coilovers or not to make sure you get the correct endlinks.