For Gen2 3sgte equipped MR2's (USDM & JDM)
This is the first modification you will need if you are thinking of increasing your boost pressure.
The MR2 Turbo uses an automatic fuel cut in order to protect the engine against major over-boosting. This normally occurs at boost levels below what the enthusiast may wish to run.
This adjustable fuel cut defender will allow you to raise the boost pressure (in small predictable increments) at which the fuel cut will trigger, thus allowing you to increase boost while retaining the fuel cut safety device.
CONTENTS
FCD with complete fitting and setup instructions. Easily installed - there are only three wires to connect.
